Phone unrooted itself lt26i

I just rooted the phone, unlocked bootloader, installed recovery and android 5 rom
When i checked my root status with SU it says not rooted

How did that happen?

via xda-developers http://ift.tt/1ROBCfc

Put the internet to work for you.

Turn off or edit this Recipe

Help, I can't get past the WIFI screen and I can't flash a new rom on this phone

Hello guys,

I need your assistance with this issue. I got this Boost Mobile LG LS770/Stylo phone from eBay and when I wiped/restored it to clean everything from the other person, the phone still wants me to enter the information from the previous person before I can use it. Of course that is not an option. I tried.

Also, since I am unable to get to the Android OS, I cannot put it in debug mode either. So I tried a few things to no avail. This is what I have done so far:

• Put the phone in ADB mode via recovery - Done, but I am unable to sideload anything. I get this error.. "* cannot read 'sideload' *"
• Put the phone in download mode "Fireware Update" - Done, and I can see my port as COM3, but when I run the next step, I get a message that says... "Hello, my name is LAF....." and nothing happens.
• I tried using the LG one click root tool, but that requires the phone to be in USB debug mode and like I said before, I am unable to even get to the welcome screen in android. I can't get past wifi setup in reality, I can't even skip it.

I have been at this all day today. Can you please help me out? I really appreciate any help you can provide.

Thanks

via xda-developers http://ift.tt/1UXoNTp

Put the internet to work for you.

Turn off or edit this Recipe

Sm g 935v root?

Is there root for smg935v yet? I don't see it on chainfires site so I'm guessing not


G935vvru2apb5 baseband

via xda-developers http://ift.tt/1ROBtZc

Put the internet to work for you.

Turn off or edit this Recipe

Nexus 2013 Timur's kernal and 4port USB hub slow charging

Hello, so I have always had this problem of my phone charging so slow while using the 4 port USB I have installed in my car.
Here is the Hub I have: 4 port usb hub: StarTech.com Mountable 4 Port Rugged Industrial USB Hub (ST4200USBM)

I have used my Nexus 7 (2013) for GPS and if using it for long period of time I have noticed that the battery will actually go low even with it constantly charging while driving.
Here is the Cigarette Lighter car charger that I use: PowerGen® 4.2Amps / 20W Dual USB Car charger Designed for Apple and Android Devices - Black
I have it just plugged straight into the cigarette lighter with the USB cable going into the NA (Not Apple) port.
(A note, I had to use a USB extension cable to get the USB cable to reach the OTG cable.)
AmazonBasics USB 2.0 Extension Cable - A-Male to A-Female - 3.3 Feet (1 Meters)

Now I have the USB Hub wired from the 12V cigarette lighter, and I use 3 USB ports from it to either Charge 1 or 2 phones, and then have a USB Drive in the other so I can play music, watch a movie etc on the Tablet.

I went with the powered 4 port USB HUB so I could charge my phone(s) while driving but it is basically worthless for doing that I don't understand why. On my commute home which is almost an hour drive My phone will barely charge 10-15% no matter what level I started charging it at.
The Nexus 7 tablet will usually stay full charged if just doing normal stuff like playing music, surfing the net. But if I use heavy power program like GPS or Play a movie it will drop and it will say Charging but it will get low until I stop those programs and let charge back up.

I am using the latest version of Timur's kernel.
My concern is, I plan on driving a long distance in a month and would like to not have to worry about my GPS killing my Tablet Battery and getting stuck, and would like to be able to power up the Cell Phones so not having to stop at some store etc to try and find a charging station.

Thanks for your time. I am pretty open as to what I can do, so if you guys have tried and true solutions please let me know.
If you need to know my vehicle it is a 1998 Mitsubishi Eclipse GSX.

via xda-developers http://ift.tt/1ROBQD4

Put the internet to work for you.

Turn off or edit this Recipe

fast wireless charging no longer an option

OK
I pre-ordered the S7 Edge. I loved it, but I had a screen failure. the local store replaced it. as I was setting it back up I noticed I was missing a specific setting.

under battery, I had an option for fast charging. when I opened that I had two options. Fast cable charging and Fast wireless charging.
so I could decide to turn one or the other off or on.

Now, I have fast cable charging only. there is no wireless fast charging option available.

what am i missing? does it still allow fast wireless?

what does everyone else have? what dos it mean?
thanks

Shawn

via xda-developers http://ift.tt/1UXoSX4

Put the internet to work for you.

Turn off or edit this Recipe

Encryption and custom ROMs

I am currently running AICP nightly. It is working great but i want to know what my options are. Can I safely encrypt this device?

Also, what happens with SD card? Does encryption not work with SD? What about SD is in that Android 6.0 mode as combined storage.

via xda-developers http://ift.tt/1ROBZGA

Put the internet to work for you.

Turn off or edit this Recipe

PegasusPowerHAL error on CM13~

Hello everyone on XDA! I flashed CM13 20160330 nightly yesterday~ And it works flawlessly. Thanks for devs work…

But recently i found my Catlog app got a problem below:

04-01 07:25:29.790 E/PegasusPowerHAL(3131): Error opening /sys/devices/system/cpu/cpufreq/pegasusq/boost_lock_time: No such file or directory

(And it will showing when i touch the screen~)

I have tried several flash on below but ALL no luck :(
1. 0329 nightly + Boeffla kernel beta25
2. 0330 nightly + stock kernel
3. 0330 nightly + Boeffla kernel beta20 (got cpu stuck problem)
4. 0330 nightly + Boeffla kernel beta 13~

Anyone knows? :)

EDIT: Phone all works fine :D

via xda-developers http://ift.tt/1ROBfRO

Put the internet to work for you.

Turn off or edit this Recipe

Qualcomm assertive display plugin for lg g3

Flash the zip file from twrp....it will add few lines in build.prop and also add a file to etc folder.
I found it at nexus6 forum...so share it with you...one lg g3 user confirm it works.

Attached Files

AssertiveDisplay.zip - [Click for QR Code] (133.3 KB)

via xda-developers http://ift.tt/1ROBlco

Put the internet to work for you.

Turn off or edit this Recipe

AP Fastboot Flash Mode (secure) BIG ISSUE!!!

:crying:Good guys!! im from Brazil and plz apologise bout mi porr english... let,s start

I was very Happy on Maxx xt1225 with soak of MM, so i think to make a little look on xda links of RR and CM13 to see if they're actualized, anyway whats a i did... just made a downgrade to stock KK 4.4.4 via fastboot instaled the TWRP and then flashed the RR, i didnt liked the rom e rollback to KK 4.4.4 with fastboot again, in this time i did not flashed the custom recovery AND REALLY DO NOT relocked mi bootloader... My Maxx started with KK and i was downloading the Lollibug to reach again the soak of MM, now theres the problem i didnt see well but the fone dont start and the display stay every time black but the usb remains alive i tried to enter again on recovery but it doesnt answer the comand, i saw on my pc it was with a diferent tipo of usb drive something like qualcom 9008 then i tried this

http://ift.tt/1ROBmgm

so finaly it starts to respond to fast boot at this time i was so happy... almost crying to think that my MAxx awaken but not for too much...

I tried the atached arquives that we saw on the post above and fastboot always say that the fastboot command was refused, then a tried stock rom KK 4.4.4 and it remains in state.

HELP ME PLZ!!! im begin you!!!

you are the best i know that can solve this problem or just say thats i have to find for motorola tecnical store


the images are atached below

sry again for mine poor english

Attached Thumbnails

       

via xda-developers http://ift.tt/1UXoIPF

Put the internet to work for you.

Turn off or edit this Recipe

Will OTA to marshmallow destroy root and s-off?

I just got a refurbished m8 from insurance, and instead of using adb to root and unlock I had to use kingroot and firewater or sunshine..whatever it's called. I haven't been able to flash a custom recovery yet, but I have an OTA to upgrade to marshmallow.

If I upgrade will I still be unlocked and rooted?

Sent from my HTC6525LVW using XDA-Developers mobile app

via xda-developers http://ift.tt/1Y2MzLM

Put the internet to work for you.

Turn off or edit this Recipe

Anyone thought about going to N6P?

I've been considering moving to the Nexus 6P, mainly for the better abilities of the phone and of course, use and selection of ROMS. Besides, if I got froggy I could try Android N. Just wondering if anyone made the switch or want to?

via xda-developers http://ift.tt/1Y2MGa4

Put the internet to work for you.

Turn off or edit this Recipe

Lockscreen: extra swype required to get to the numpad for PIN input

Up until Lollipop you had the PIN input numpad right there on the lockscreen so you could just wake the device and input the pin directly. With Cyanogenmod 11 you could even skip having to press OK after input -> very convenient, just perfect.
Even with Lollipop and Touchwiz on the S6 you had the numpad right there below the notifications after waking the screen.
Now on the stock S7 MM/TW you have that annoying extra swype to get to the numpad.
Does anyone know how I can get the old convenient design of the lockscreen with the numpad directly accessible on the S7? (but not what CM 12 did, where you could set it to jump to the numpad directly but then you had to swype back if just checking the time or notifications or taking a quick shot)

via xda-developers http://ift.tt/1MFa9O0

Put the internet to work for you.

Turn off or edit this Recipe

Stuck on boot screen

i need help with my pop c7 i bought off someone and they didnt tell me it was rooted so i factory reset it and wont turn on any ideas wut i can do to get it back to use

via xda-developers http://ift.tt/1Y2MJmu

Put the internet to work for you.

Turn off or edit this Recipe

[Mod] Enable Digital Dolby

Hey guys im not sure if this has been posted here yet, but I can't find it so i thought I would do a write up.

This mod enables Digital Dolby effect in the stock music player.

Must be rooted.
Not responsible for broken phones..

1. In your root browser navigate to device/etc/com.lge.music.xml

2. Scroll to audio_effect data=

3. Now change the value FROM "lgeffectwithcustom" TO "dolby"

4. Save and restart

5. Go to music player and now you are able to select Digital Dolby from the effects list.

Attached Thumbnails

 

via xda-developers http://ift.tt/1MFafFv

Put the internet to work for you.

Turn off or edit this Recipe

Locales not showing up in Settings even though they are installed

Hi everyone,

I'm working on an AOSP device which has a limited set of locales, and I wanted to add Portuguese to the device. I did this by modifying device/qcom/common/common.mk and adding in pt_PT to PRODUCT_LOCALES. With the image that this build produces, I can successfully set the language to Portuguese through the setprop persist.sys.language settings, but if I go to Settings -> Language and Input -> Language, Portuguese is not on the list.

Does anyone have any ideas on how I can add a language to the languages list in Settings?

Thank you.

via xda-developers http://ift.tt/1Y2MyHR

Put the internet to work for you.

Turn off or edit this Recipe

Different Display-Panels/Quality?!

hey guys, i just receive two LG G4 (H815) from the amazon warehouse.

I have the feeling that one of the devices has a little brighter display with also a little better viewing angles (both tested at 100% brightness).

Is that possible?

Does LG build in diffrent panels or are my eyes fooled?

via xda-developers http://ift.tt/1MFacJH

Put the internet to work for you.

Turn off or edit this Recipe

SSH Question

Can you ssh into a phone without root or having an app on the phone? I am wondering because a friend of mine broke his s4 and wants hi pictures off the phone. I have already tries connecting the phone to 3 pc's and all would not recognize the phone as an external media. I also tried installing the Samsung drivers on all pc's .

via xda-developers http://ift.tt/1MFa1hp

Put the internet to work for you.

Turn off or edit this Recipe

Don't try to open your OPX!!

Hey guys,

The detailed problem:
I've worked for 2 months into a factory that had crazy amounts of dust and metal residue in the air. Since then i had 2 problems with my phone, both self inflicted by the workplace:
1. my earpiece got killed (compressed air)
2. my mic got suuuuper quiet, the other party could only hear me (badly) if i spoke really loud, or shouted. Also my speaker got quieter.

So in regards of these 2 problems, i had a buddy of mine (who has a phone repair service) to take a look inside. I bought a earpiece speaker for oneplus 2, but it didnt match. the one that matched was from a nokia lumia 930-925 (something like that). I had a hard time getting out the battery, and when the microphone got cleaned, it shed of a large amount of metal residue, the speaker too had a less amount of residue. The problems came when they needed to put the whole phone back. The back cover is THE WHOLE PHONE is made out of rubbish materials (i still love this phone to pieces , and the money value is superb) and the back cover had some "minor" problems when glued back, the rim (which is made out of thin rubber) that holds the back glass cover , got ****ed up, and the glue didn't do its best job, so in a corner the glass got cracked. Also because of the glue and the rim inside the phone the plastic cover is now standing loose.

tl;dr the phone materials are rubbish, back cover got a little cracked in a corner after repairing microphone and earpiece.

All in all i still love the phone, and its a great value for money, but when it comes to repairing...just dont...try to give it back to oneplus to repair it and dont accept bull**** if it comes back looking bad.

via xda-developers http://ift.tt/1Y2MHe8

Put the internet to work for you.

Turn off or edit this Recipe

Mirrorlink connection issue

Hi,

I wanted to know if somebody succeeded in connecting the m8 with mirrorlink.

For me, mirrorlink does not work with my Bosch
multimedia system in my Suzuki vitara 2016. I'm on a m8 last european rom
android 6.12.401.4 with every HTC apps updated.

The connection is established on the phone but nothing appears on the car
screen( no connection).

I have also tested with my girlfriend HTC m8 with lollipop and it doesn't
work either.

Does somebody use mirrorlink?

Any help?

Envoyé de mon HTC One_M8 en utilisant Tapatalk

via xda-developers http://ift.tt/1Y2MI1O

Put the internet to work for you.

Turn off or edit this Recipe

Australian Firmware for SM-9000 Note 3

Hi,

I did a search for this but nothing came up, been googling for hours so I thought maybe you guys might know. I downloaded a SER (russian) ROM for the device but I cannot use this as it's in russian and spitting up errors after I factory wipe/reset.
Anyone know of a working download link of the XXUENG1 (I've heard this works) Galaxy Note 3 ROM?

Thanks,
Steve

via xda-developers http://ift.tt/1Y2MDLt

Put the internet to work for you.

Turn off or edit this Recipe

Noob with Huawei phone - 2 issues.

Hi,

I got a Huawei phone to play with and I tried unlocking the bootloader and installing a new ROM.
Got root with rootking. Can't install SuperSU.

1. I unlocked the bootloader via unlocker.
Whenever I try to install TWRP recovery, The recovery doesn't load up and the device restarts.
I have tried 2870 and 3000. nothing works.
Flashed stock recovery 2.3 back so I will have a recovery on the device.
What seems to be the problem?

2. The phone's build is P7-L10V100R001C00B125.
Custom ver. CUSTC576D125
I would like to update to the latest version.
What version can I update to ? I've read so many posts and I can't understand if I can update to P7-L10C900B852 (via a full image file) for example.
Do I have to change the custom ver. or not ?
Please explain the rules about the build number and the custom ver.

Thanks in advance
J

via xda-developers http://ift.tt/1MF9WdO

Put the internet to work for you.

Turn off or edit this Recipe

ERROR WHILE RESTORING /DATA! gs4 i9500 5.0.1 with cwm Please HELP :(

Restoring data...
Error while restoring /data!
tar: write error: Read-only file system
rList-com.android.setting. AppPicker
rList-com.android.setting.MediaFormatsd
rList-com.android.setting.ConfirmLockPasswor

sans. loc

DroidSans.ttf
DroidSans-Bold.ttf
Error while restoring /data!
I: Can't partition non-vfat: datamedia
I:Can't format unknown volume: /emmc

via xda-developers http://ift.tt/1Y2MCHv

Put the internet to work for you.

Turn off or edit this Recipe

3G problem

Hi all,
is a couple of days that my Photon Q have some problems with carrier and data signals.
The phone have SIM mod and running on Wind Italian carrier.
Until one week ago I don't have any problem to use it in GSM (EDGE data connection) or UMTS (HSDPA data connection). Now I'm able to run the phone only with GSM connection. If I choose WCDMA (UMTS) connection the phone lost the signal.
I try to change the configuration a lot of time (and reflashing the ROM, CM 12.1 stable release) without success... only the "GSM only" mode guarantee the phone to connect.
I try to open the cover to perform some chech with the internal antennas... but there is a lot of it!


upper left, upper right, central right, bottom left, bottom... 5 antennas!
+ one in the main board (the black wire in the top of this image):



Now, I'm almost sure that the black wire in the mainboard is the 2G antenna (the phone connect to the GSM signal also without the cover connected)... but the other 5 antenna in the cover?
Do you know where is the UMTS antenna?

via xda-developers http://ift.tt/1MF9T1z

Put the internet to work for you.

Turn off or edit this Recipe

Review of the Official Cover-Up Wood Back Explorer case for the Samsung Galaxy S7 Edg

This is my review of the Official Cover-Up Wood Back Explorer case for the Samsung Galaxy S7 Edge I have the walnut version and love this case it feels fantastic in hand. Click this link below to view it.

https://youtu.be/VlUaK1R7iAU

Please consider subscribing to my channel and check out my other case reviews. If your interested check out my Cover-Up Wood Back snap back case review also to compare the 2 different types of cover.

https://youtu.be/Urn01-OSUqw

Please enjoy and thank you.

via xda-developers http://ift.tt/1MF9RGR

Put the internet to work for you.

Turn off or edit this Recipe