Tuesday, July 5, 2016

[GUIDE] How flash stock rom/restore twrp backup/reanimate mate7 for noob

Hi all again. Today i write guide for noob :D

How Flash Stock rom???

1. First download rom to your pc
2. When you download rom open in winrar and check pack
3. If you have only one file update.app you can extrack but first you must create in desktop folder named dload and extract there.
4. If you have root and want flash full rom you can do it but you must have stock recovery.
5. Copy dload to your extsdcard and go to dialpad and write *#*#2846579#*#* and choise 4 and 1.
6. Your phone now power off and flash new firmware.
7. When its finish your phone boot again with new firmware.

P.s Flash firmware for your region or you be have bootloop or software brick and if you have you must have unlocked bootloader to reanimate your mate7

How Flash Ota update???


1. Download Ota update to your pc
2. Open using winrar and check do you have all folder and file look for exsample

cust
META-INF
patch
system
update.app

3. If you have that same folder do not extract from update.zip
4. Create dload on desktop and copy there update.zip and now copy to your extsdcard and go to dialpad and write *#*#2846579#*#* and choise 4 and 1.
5. Your phone now power off and flash new firmware.
6. When its finish your phone boot again with new firmware.

How restore twrp backup ???

1. If you have lollipop you must use pc to create folders:
TWRP/BACKUPS/ here you must put downloaded backup
2. If you have marshmallow you must use pc to create folders:
TWRP/BACKUPS/YOUR SERIAL NUMBER/ and here you must put downloaded backup
3. Download backup for your mate7 and extraxt to desktop
4. Copy all file to create folder and now copy TWRP folder to your internal sdcard or ext sdcard.
5. Power off your phone and go to TWRP RECOVERY
6. Select storege where you copy backup and now go restore.
7. If you see backup you can now restore.
8. Whene its restore go back and do it wipe data/cache/dalvick cache and reboot
9. First boot can make very long time and wait when in boot to system.

P.s When you use TWRP 2.8.7.X and do ot wipe data you lose your file and vendor country but when you use TWRP 3.0.2.0 you don't lose. If you lose you must restore using tool from this topic but you must be root

http://ift.tt/29fPNcw

How to reanimater your mate after bootloap???
We have 2 methode for now.

Firts it's restore twrp backup and secend its fastboot and downgrade pack

If you use twrp backup and its work very good for you but if dont work you must use fastboot method

1. Power off device and go to fastboot
2. Extract file from update.app for lollipop :

- system
- cust
- boot
- recovery
- userdata

for Marshmallow extract :

- system
- cust
- boot
- recovery

3. Install adb drive from this topic

http://ift.tt/1KFcfMG

and copy all file to C:/adb on your windows
4. Open CMD as administator and write this commads

cd C:/adb
adb fastboot

Now you on fastboot mode
When you extract file frome update.app you must rename file :

10.boot.img to boot.img
11.recovery.img to recovery.img
13.cust.img to cust.img
14.system.img to system.img

If you remane you can flash img file using fastboot methode using cmd

fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img

It's take very long but wait. When its finish take micro sd adapter and put you micro sdcard and connect to pc and copy full rom :
If you use lp file because you have bootloop on lp you must flash that same rom what you flash file using fastboot
and do it that same for marshmallow

when you copy put your adapter to slot of microsdcard in your mate7
Now power of your phone and try go to flash method using 3 bottom on you mate7

VOL+ POWER + VOL- when you seescreen on realese power and wait. Now you see how rom its flash.

If you have error you must use downgrade pack from mm to lp and flash.
When its flash you must flash lp.
If you have error you must use downgrde pack from lp to kk and flash.
When its finish you must flash kk rom.

Now you back to rom after bootloop and you can try again flash rom what you want.

Finish guide for noob :D

Cheers :highfive:


from xda-developers http://ift.tt/29f05gE
via IFTTT

No comments:

Post a Comment