Hi guys,
I was trying to find out how to restore my phone because it's dead after receiving and installing the last firmware (Netherland PHN 4.4.2 stock ROM-there was no Custom ROM) by OTA. It was working for few days but after that my phone began restarting and finally it stopped work at all. I wasnt able to turn in on, charge it or simply connect to pc (PC didnt recognized driver - qhsusb_dload) there was no respond so it was completely dead.
I found some solution with debrick image here on forum, but when i putted debrick.img (found some for I9195 android 4.4.2 on web) into sd card via win32diskmanager and inserted it into my phone i was able to get some respond by a phone.
Withou debrick image on sd cart i can't turn my phone on at all but with inserted debrick image i have a chance to turn it on but with some kind of boot loop.
Boot loop:
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
REBOOT
And it repeats all the time.
With SD Card PC can recognised samsung drivers for my phone but odin can't connect.
I dont know what i did once time but i get another message when odin was able to recognise it
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
FLASH WRITE FAILURE (Red row)
ddi: mmc_read failed
ODIN MODE (Red row)
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
But i'm not able to get into this anymore.
Last status is repetitive first bootloop and i cant get further.
I dont know what to do, to repair my phone or if its completely dead (mean eMMC fail).
Can someone help me with this issue or know some solution
Thanks in advance
I was trying to find out how to restore my phone because it's dead after receiving and installing the last firmware (Netherland PHN 4.4.2 stock ROM-there was no Custom ROM) by OTA. It was working for few days but after that my phone began restarting and finally it stopped work at all. I wasnt able to turn in on, charge it or simply connect to pc (PC didnt recognized driver - qhsusb_dload) there was no respond so it was completely dead.
I found some solution with debrick image here on forum, but when i putted debrick.img (found some for I9195 android 4.4.2 on web) into sd card via win32diskmanager and inserted it into my phone i was able to get some respond by a phone.
Withou debrick image on sd cart i can't turn my phone on at all but with inserted debrick image i have a chance to turn it on but with some kind of boot loop.
Boot loop:
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
REBOOT
And it repeats all the time.
With SD Card PC can recognised samsung drivers for my phone but odin can't connect.
I dont know what i did once time but i get another message when odin was able to recognise it
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
FLASH WRITE FAILURE (Red row)
ddi: mmc_read failed
ODIN MODE (Red row)
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
But i'm not able to get into this anymore.
Last status is repetitive first bootloop and i cant get further.
I dont know what to do, to repair my phone or if its completely dead (mean eMMC fail).
Can someone help me with this issue or know some solution
Thanks in advance
from xda-developers http://ift.tt/294rhze
via IFTTT
No comments:
Post a Comment