So...you wanted to push the limit of your Le 1 Pro (x800) phone and install a newer ROM, but surprise...you bricked your phone?! :p Welcome to the solution...
Requirements:
-Hard-bricked Le 1 Pro, aka x800 (HARD BRICKED = Nothing comes up, no Penguin [fastboot], no Recovery)
-Windows Computer (I used Windows 7 32-bit, but Win8/10 32/64-bit should also work fine.)
-USB Type-C Data/Charge cable
-Qualcomm QPST 2.7 Build 429 (older versions such as 422 or 427 DO NOT WORK, I've tried.)
-Qualcomm Drivers
Review this link: http://ift.tt/1S33pt2 (It talks about putting the computer in test mode and removing all existing drivers...either of which may or may not be required. If you run into trouble, try some of the things from this link!!)
Steps:
1) Download this zip file (contains everything you need): http://ift.tt/25GghuU (1.33GB File Size)
2) Unzip it.
3) Install "QPST.2.7.429.msi".
4) Plug-in phone and install applicable drivers from "Qualcomm_Drivers" folder (x86 = 32-bit, x64 = 64-bit).
5) From your computers applications folder, run "QFIL".
6) At the top, it should say something like "Qualcomm HS-USB QDLoader 9008 (COM3)". (If not try holding the phone's power button for maybe 5-20 seconds. If that doesn't work, see the above link about running your computer in test mode, uninstalling existing drivers, etc.)
6) Choose "Flat Build".
7) Click "Browse..." and choose prog_emmc_firehose_8994_lite.mbn from the "x1_na_dvt1_fastboot" folder.
8) Click "Load XML..." and choose rawprogram_unsparse.xml and when prompted, patch0.xml from the "x1_na_dvt1_fastboot" folder.
9) Click "Download" and let the fun begin.
Disclaimer:
Apologies ahead of time if I don't have time to help you all troubleshoot. This is a complex process and although I've tried to make it easier, there will probably be some speed-bumps...like everything in life. Like you, this has already sucked up a lot of time and energy. I truly hope that those who are successful can help others! Best of luck to you!
Requirements:
-Hard-bricked Le 1 Pro, aka x800 (HARD BRICKED = Nothing comes up, no Penguin [fastboot], no Recovery)
-Windows Computer (I used Windows 7 32-bit, but Win8/10 32/64-bit should also work fine.)
-USB Type-C Data/Charge cable
-Qualcomm QPST 2.7 Build 429 (older versions such as 422 or 427 DO NOT WORK, I've tried.)
-Qualcomm Drivers
Review this link: http://ift.tt/1S33pt2 (It talks about putting the computer in test mode and removing all existing drivers...either of which may or may not be required. If you run into trouble, try some of the things from this link!!)
Steps:
1) Download this zip file (contains everything you need): http://ift.tt/25GghuU (1.33GB File Size)
2) Unzip it.
3) Install "QPST.2.7.429.msi".
4) Plug-in phone and install applicable drivers from "Qualcomm_Drivers" folder (x86 = 32-bit, x64 = 64-bit).
5) From your computers applications folder, run "QFIL".
6) At the top, it should say something like "Qualcomm HS-USB QDLoader 9008 (COM3)". (If not try holding the phone's power button for maybe 5-20 seconds. If that doesn't work, see the above link about running your computer in test mode, uninstalling existing drivers, etc.)
6) Choose "Flat Build".
7) Click "Browse..." and choose prog_emmc_firehose_8994_lite.mbn from the "x1_na_dvt1_fastboot" folder.
8) Click "Load XML..." and choose rawprogram_unsparse.xml and when prompted, patch0.xml from the "x1_na_dvt1_fastboot" folder.
9) Click "Download" and let the fun begin.
Disclaimer:
Apologies ahead of time if I don't have time to help you all troubleshoot. This is a complex process and although I've tried to make it easier, there will probably be some speed-bumps...like everything in life. Like you, this has already sucked up a lot of time and energy. I truly hope that those who are successful can help others! Best of luck to you!
via xda-developers http://ift.tt/1TVGX8F
Put the internet to work for you.
No comments:
Post a Comment