PRISIST ERROR IN TWRP WHILE FLASHING ANY ZIP.....? THEN HERE IS THE GUIDE
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
What is the persist partition?
Follow instructions carefully to solve this issue
ADB+&+Fastboot : link
persist : link
@Annabathina............................for Guide
Ricks ............... for Presist file
YU YUREKA
YU YUREKA PLUS
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
What is the persist partition?
Persist is partition mounted at /persist. It has ext4 file system. DRM releated files, sensor reg file (sns.reg), wifi and bluetooth mac addresses are stored there.
If you experience the following issues:
1. You get "e: cannot mount /persist" in recovery
2. Can't access to internal storage.
3. Boot loop on Lollipop 5.0 and above
4. IMEI number is lost even after formating cache and fastboot flash cache.img
5. No signal even after formating cache and fastboot flash cache.img
Then your persist partition have to be fixed
If you experience the following issues:
1. You get "e: cannot mount /persist" in recovery
2. Can't access to internal storage.
3. Boot loop on Lollipop 5.0 and above
4. IMEI number is lost even after formating cache and fastboot flash cache.img
5. No signal even after formating cache and fastboot flash cache.img
Then your persist partition have to be fixed
Follow instructions carefully to solve this issue
1. Download this " presist file & ADB+&+Fastboot of yureka " provided by @Annabathina
2. extract them in PC
3. open ADB+&+Fastboot of yureka
4. place presist.img file which you have extracted in ADB+&+Fastboot folder
5. Hold shift key and right click on mouse and select Open command window here
6. Connect your device to pc..... and make shure that drivers are installed properly..... ( VERRY VERRY IMPORTENT )
a. Type : adb devices
If your device is connected you will get it in connected devices list
b. Type : adb reboot-bootloader
Your phone will restart into bootloader.
c. Type : fastboot -i 0x1ebf flash persist persist.img
7. Disconnect your device from PC and REBOOT
2. extract them in PC
3. open ADB+&+Fastboot of yureka
4. place presist.img file which you have extracted in ADB+&+Fastboot folder
5. Hold shift key and right click on mouse and select Open command window here
6. Connect your device to pc..... and make shure that drivers are installed properly..... ( VERRY VERRY IMPORTENT )
a. Type : adb devices
If your device is connected you will get it in connected devices list
b. Type : adb reboot-bootloader
Your phone will restart into bootloader.
c. Type : fastboot -i 0x1ebf flash persist persist.img
7. Disconnect your device from PC and REBOOT
ADB+&+Fastboot : link
persist : link
@Annabathina............................for Guide
Ricks ............... for Presist file
YU YUREKA
YU YUREKA PLUS
XDA:DevDB Information
[Guide] Prisist error fix in YUREKA / PLUS [21-Apr-2016], Tool/Utility for the YU Yureka
Contributors
Annabathina
Version Information
Status: Stable
Stable Release Date: 2016-04-21
Created 2016-04-21
Last Updated 2016-04-21
via xda-developers http://ift.tt/1Tl24gY
Put the internet to work for you.
No comments:
Post a Comment