I have decided to sell my Moto X and so I decided that I would restore it to stock firmware before I let anyone else take it over.
Everything on it (Pictures etc) is already transferred to my computer and deleted from the phone, so no worries about that.
To start with I had the bootloader unlocked, was rooted and running Nexus Experience.
I downloaded a factory image (VICTARA_RETEU_XT1092_5.1_LPE23.32-25.1_cid7_CFC.xml) I found here on XDA manually,
and flashed it manually as follows:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
Then I get the warning that the bootloader has been unlocked. At first it got stuck there, but after forcing it to
shut down and trying again it gets past it and instead it starts flashing the android figure laying on it's back with a lid open
and a red hazard sign above it, telling me "No command". This appears for about 0.1 seconds every fourth second.
So here I am now, the phone is still flashing this message and it seems I can't really turn it off. I can (Sometimes, with a little
luck) reach fastboot mode, but whatever I choose from there takes me to the bootloader warning and the "No command" message.
Is there anyone that can guide me through this so I can get it up and running again and hopefully back to stock firmware?
Everything on it (Pictures etc) is already transferred to my computer and deleted from the phone, so no worries about that.
To start with I had the bootloader unlocked, was rooted and running Nexus Experience.
I downloaded a factory image (VICTARA_RETEU_XT1092_5.1_LPE23.32-25.1_cid7_CFC.xml) I found here on XDA manually,
and flashed it manually as follows:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
Then I get the warning that the bootloader has been unlocked. At first it got stuck there, but after forcing it to
shut down and trying again it gets past it and instead it starts flashing the android figure laying on it's back with a lid open
and a red hazard sign above it, telling me "No command". This appears for about 0.1 seconds every fourth second.
So here I am now, the phone is still flashing this message and it seems I can't really turn it off. I can (Sometimes, with a little
luck) reach fastboot mode, but whatever I choose from there takes me to the bootloader warning and the "No command" message.
Is there anyone that can guide me through this so I can get it up and running again and hopefully back to stock firmware?
via xda-developers http://ift.tt/1MLc3ZZ
Put the internet to work for you.
No comments:
Post a Comment